WDI Toilet Flush Box 2020 | Genuine iLife Cistern Part

The Critical Connection: The WDI Flush Box 2020 is designed to work in perfect sync with the Parisi Push Plate Bracket (SP.PA0012).

• The Bridge: While the bracket holds your Blade or Tondo push plate to the wall, this Flush Box sits behind it to translate your button press into a flush.

• The Red Cable: It is typically found in systems featuring the Single Red Pneumatic Cable.

• Compatibility: This is the standard 2020-spec box for Parisi/iLife in-wall cistern models PA130, PA135, and PA140.

Genuine WDI Factory Part WDI is the global leader in cistern technology, providing the internal “engines” for major Australian brands like Parisi, iLife, and Argent. If your toilet has stopped flushing—even though you can feel the buttons moving—the internal levers or pneumatic seals within this Flush Box may have failed.

Diagnostic Checklist:

• Non-Responsive Buttons: You press the button, but nothing happens inside the tank.

• Partial Flush: The button only engages the valve halfway because the Flush Box levers have slipped or worn.

• Sticky Operation: The buttons stay depressed because the return mechanism in the box is jammed.

Recommended Service Tip: If you are replacing the Flush Box, we strongly recommend also checking your WDI Outlet Valve Seal. Since you already have the cistern access open, replacing the seal at the same time prevents future leaks and saves on a second plumber visit.

Mascot Warehouse – Ready for Dispatch

We understand that a non-flushing toilet is an emergency. We maintain deep stock of WDI components:

• 8 out of 10 orders delivered on or before time.

• Fast Dispatch: We aim to ship all WDI parts within 24 hours.

• Emergency Pickup: Order online and select Uber/Courier Pickup from our Mascot location for an immediate repair today.

• Q: Will this fit my older (pre-2020) Parisi cistern?

  • A: This is the 2020 revision. While it fits the PA130/135/140 series, we recommend comparing your existing box to the product photos to ensure the cable connection points match.

• Q: My buttons say “iLife”—is this the right part?

  • A: Yes. iLife systems almost exclusively use WDI internals. If your plate uses a single red cable, this is the matching flush box.

• Q: Does this come with the push plate bracket?

  • A: No. This is the internal box only. The mounting bracket is sold separately.