WDI Push Plate with Rectangle Buttons

To transition from the WDI Push Plate (rectangle buttons) to the Parisi range while using the existing WDI Flush Box (2020) and the WDI 1 Red Cable Outlet Valve, you must ensure the following compatibility requirements are met:

1. Necessary Conversion Bracket

The most critical part for this transition is the Parisi Push Plate Bracket (SKU: SP.PA0012).

• Why: This specific bracket is designed to bridge the gap between Parisi push plates and the WDI internal mechanisms.

• Compatibility: It is explicitly listed as being required for Tondo and Blade panels when they are being used with either the SP.PA0028 (Parisi’s equivalent valve) or the WDI Flush Box.

2. Compatible Parisi Push Plates

Once the SP.PA0012 bracket is installed, you can use the standard Parisi mechanical push plate ranges, which are more readily available in bulk:

• Tondo Series: (e.g., PA220, PA221) – Round buttons.

• Blade Series: (e.g., PA230, PA231) – Slim rectangular/square buttons.

• 400 Series: (e.g., PA400 Tondo II, PA401 Blade II).

3. Technical Note for the “1 Red Cable” Valve

Since you are using the WDI Mechanical Outlet Valve (525mm) with the single red cable/connector:

• The SP.PA0012 bracket serves as the mounting point that allows the Parisi plate’s mechanical rods to actuate the WDI cable box.

• Stocking Strategy: Since you purchase 10 at a time, you should maintain a matching stock of the SP.PA0012 brackets alongside the Parisi plates, as the plates usually ship with brackets meant for Parisi-specific cisterns, not the WDI Flush Box.

Summary of Parts Required:

1. Push Plate: Parisi Tondo or Blade (any finish).

2. Mounting Component: Parisi Push Plate Bracket for PA130/135 & PA140 (SKU: SP.PA0012).

3. Existing Internals: WDI Toilet Flush Box 2020 + WDI Mechanical Outlet Valve.

Verdict: The Parisi plates are a viable long-term replacement for the WDI rectangle plates, provided the SP.PA0012 bracket is used to facilitate the connection to the WDI flush box.